Step 1: Open the existing kitchen plan with KPS and copy the original plan.
Step 2: Open the input mask for customer information. Click on Next on the next page and enter an order number.
Step 3: Click with the cursor on the reference wall to insert the measurement data; usually the planning wall above.
Step 4: Open via Insert >>> Measurement the measurement interface.
Step 5: Click on Define Reference wall.
The previously selected wall is set as the reference wall.
Step 6: Open again via Insert >>> Measurement the measurement interface and choose Place order.
Step 7: Under Measurement type, activate the kitchen with a tick, select an order date and confirm shipping.
You will receive a message that the order was created successfully. Confirm this with OK.
Step 8: Open again via Insert >>> Measure the allowance interface and select Import allowance.
Step 9: Open Select the import file g05 in your storage directory and click on open.
Step 10: Confirm your selection with OK.
You will be informed that the measurement has been imported successfully. Confirm this with OK.