Re-entrant Walls

SiteMaster Kitchen v6, Re-entrant Walls

Sabine Becker avatar
Written by Sabine Becker
Updated over a week ago

How to measure re-entrant walls.

Step 1: Choose wall.

Step 2: Measure the lengths of walls 1 and 2 as usual.

Step 3: Before measuring the lengths of walls 3, 4 and 5, change the wall thickness to 10 mm.

Step 4: Change the wall thickness back to 250 mm before measuring wall 6.

Step 5: Measure further walls as usual or end the measurement by clicking on Done.

Then you can use the Check angle to

Check the relevant angles of the re-entrant wall or use the existing values.

Did this answer your question?