Step 14: Change the Floor Height (Floor Level)

SiteMaster Kitchen v6, Change the Floor Height (Floor Level)

Sabine Becker avatar
Written by Sabine Becker
Updated over a week ago

You only need to work with the Floor height command if there will be a deviation between the currently measured floor height and the floor height of the kitchen planning.

Step 1: Step 1: Choose Floor Level.

Step 2: Give either

  • shows a positive value if the new altitude level is above the measured level.

or

  • shows a negative value if the new altitude level is below the measured level.

Step 3: Click OK.

Did this answer your question?