Skip to main content

ARES Commander 2027 - Release Notes

ARES, Commander, 2027, Release Notes

Written by Levi Miguel

LAST UPDATE: 2027 SP2 (27.2.1.3135) - Released 05/10/2026

Click here to access the download page

Update instructions: After downloading, close ARES and start the installation. The service pack can be installed without previous uninstallation.

Below you can find the main fixes and new improvements on ARES Commander 2027 SP2:

  • New features or enhancements:

    • VPMAX and VPMIN commands

    • XLSX Export Support for Data Extraction

    • Open and Attach DWFx file format

    • New value on EXPERT variable to disbale read-only message

    • LISP Startup manager

    • Manage AI Feature Consent in Options dialog

  • Open and save:

    • Resolved crash issue when logging out with unsaved cloud drawings and selecting 'No' on save prompt. [DESKTOP-470769]

    • Fixed issue where a drawing recovery message appeared in AutoCAD after saving specific files in ARES. [DESKTOP-466284]

    • Resolved crash when saving drawings with civil entities. [DESKTOP-468891]

    • Resolved an issue on MacOS where an unnecessary instance of ARESC was created. [DESKTOP-460312]

  • Print, export and sheets:

    • Resolved issue where BATCHPRINT process could get stuck if 'Page layout override' was used with an unavailable printer, allowing users to abort and exit the application smoothly. [DESKTOP-395869]

    • Exiting 'Print Preview' for large 3D solids in BATCHPRINT no longer causes the application to hang. [DESKTOP-464540]

    • Resolved an issue where Batch Print would freeze if a file with the same name existed. [DESKTOP-477568]

    • CDR file format import/export functionality has been removed. [DESKTOP-477856]

    • Resolved issue where preview and print showed incorrect color, lineweight, and line type with XREFOVERRIDE set to 1. [DESKTOP-258467]

    • DocuWorks printer settings are now correctly saved in .pcx files, ensuring consistent print configurations. [DESKTOP-332708]

    • Resolved issue where EXPORTPDF/PRINT did not match selected visual style with PERSPECTIVE set to 1. [DESKTOP-352793]

    • Gradient FILLAREA displays correctly in PDF when printing in isometric view. [DESKTOP-378676]

    • Resolved the issue where print previews appeared vertically compressed with the RICOH IM C4500 JPN RPCS driver. [DESKTOP-481205]

    • EXPORTSHEET command exports text at the correct height, matching the current settings. [DESKTOP-207721]

    • Exiting an active viewport with a double-click is possible even when a Table cell is active. [DESKTOP-294439]

    • The 'Export Sheet...' option in the right-click menu is disabled when model space is active, preventing unintended actions. [DESKTOP-472090]

    • The SHIFT key now selects multiple sheets correctly, enhancing workflow efficiency. [DESKTOP-476084]

  • Geometry draw or modification:

    • Resolved crash issue when selecting certain blocks using EDITSOLID > Face, ensuring smoother operations. [DESKTOP-365336]

    • Resolved display issues with entities created using the SWEEP command set to 'Solid'. [DESKTOP-430166]

    • Resolved an issue in the SLICE command where selecting Keep Both Sides (B) and pressing Enter did not slice the solid when using Planar Object (E) as the slicing plane. [DESKTOP-442067]

    • Resolved a crash issue when stretching the grip of a complex sweep solid pasted as a block. [DESKTOP-471271]

    • SWEEP command in ARES generates accurate profiles after sweeping. [DESKTOP-475433]

    • DISPLAYORDER command now functions correctly for entities on locked layers. [DESKTOP-45075]

    • Replaced elements in patterns retain changes after running additional patterns or copies. [DESKTOP-392599]

    • Cursor no longer freezes when using PROPERTYPAINTER on hatch properties. [DESKTOP-443029]

    • Resolved crash issue when stretching a civil entity square grip in Geometry Modify. [DESKTOP-448575]

    • The command window no longer displays an error message after using QUICKUNGROUP from the right-click menu. [DESKTOP-453996]

    • Resolved issue with EXTRIM where Shift key functionality was unavailable. [DESKTOP-470332]

    • EDITHATCH command can be ended using the Enter or Space key. [DESKTOP-425453]

    • The command line no longer displays the 'Hatch boundary relation removed' message twice when changing 'Associative' to 'No' in the Property palette. [DESKTOP-429873]

    • The Hatch ribbon no longer stays active after canceling ATTACHPDF, IMAGE, or DRAWING commands. [DESKTOP-476481]

    • Undo command respects the undo mark, ensuring accurate step reversals. [DESKTOP-483512]

    • Resolved issue where *MAKESHAPE* command displayed a previous file name instead of the current drawing name in XtraTools. [DESKTOP-467573]

  • Blocks and Data extraction:

    • Resolved an issue where editing a custom grip in MULTILEADER caused it to lose its link with the block, ensuring consistent behavior when modifying block attributes. [DESKTOP-91228]

    • The 'Rotation Parameter' for Custom Blocks correctly accepts the maximum angle when changed to increment type. [DESKTOP-127701]

    • The scale issue with Block insertion in the German language has been resolved, ensuring accurate placement. [DESKTOP-471631]

    • Resolved issue causing ARES to hang when moving constrained entities. [DESKTOP-50608]

    • Resolved issue where deleting copied constrained geometry also removed derived dimensional constraints from the source entity. [DESKTOP-473790]

    • Resolved error when moving, scaling, or rotating entities with derived dimensional constraints. [DESKTOP-476507]

    • Text alignment remains stable when changing 'Visibility' state after mirroring a custom block. [DESKTOP-437587]

    • Resolved crash when updating data tables after copy-pasting in UPDATEDATALINK. [DESKTOP-372701]

    • Resolved an issue causing crashes when updating a Data Link Table after deleting an entity in the drawing. [DESKTOP-473893]

    • BIM Data Extraction respects property selections from .det files across different models. [DESKTOP-475860]

    • Custom block properties in the Tool Palette retain their settings after a restart. [DESKTOP-478178]

  • Annotations:

    • Superscript and subscript options for text entities have been introduced, allowing users to format text with greater precision and flexibility. [DESKTOP-100702]

    • Selecting a note with bullet formatting for editing no longer alters the zoom level. [DESKTOP-463539]

    • The text alignment in table cells within specific files has been corrected, ensuring consistent formatting across your documents. [DESKTOP-463560]

    • Text editing with IME displays specific Japanese characters correctly. [DESKTOP-465402]

    • Resolved freezing issue when using Find > Wildcard (*) > Replace All in annotations. [DESKTOP-471767]

    • Resolved a crash issue when pasting Excel print areas into ARES drawings using 'Paste Link' with 'Drawing Entity' format. [DESKTOP-478245]

    • Backspace key issue in field values resolved. [DESKTOP-478258]

    • Table cell values in ARES no longer round off unexpectedly, ensuring accurate data display. [DESKTOP-484363]

    • The Annotate tab in the Ribbon now correctly displays the dimension style when a dimension with a sub-style is selected, ensuring accurate style selection. [DESKTOP-430247]

    • Fractional unit dimensions display correctly in EDITANNOTATION. [DESKTOP-437549]

    • Resolved an issue where inserting columns in a table could disrupt cell merges or cause text to vanish. [DESKTOP-467578]

    • Resolved issue where inserting a column would unmerge previously merged cells in TABLE. [DESKTOP-467622]

    • Table title cells merge correctly when inserting a column on the right. [DESKTOP-477563]

    • Resolved an error message that appeared during Text commands when using NETLOAD in LISP files. [DESKTOP-479146]

  • Graphic System:

    • Entities display correct color, lineweight, and line type with XREFOVERRIDE set to 1. [DESKTOP-258476]

    • Grid visibility updates immediately when F7 is enabled running Rectangle/Circle commands, without needing to zoom in/out. [DESKTOP-470718]

    • The grid lines in perspective mode now correctly appear over points, ensuring clearer visibility in the View Navigator. [DESKTOP-473855]

    • The grid display issue when GRIDDISPLAY is set to 8 and the view isn't the XY plane has been resolved. [DESKTOP-479167]

    • Resolved an issue where the background color turned black when zooming in/out with a 3D solid in the viewport using Visual Style in Sheet.. [DESKTOP-458797]

  • User interface:

    • Spellcheck corrections in simplenote, dimension, and table texts are applied correctly. [DESKTOP-477165]

    • The toolbar was misaligned, preventing 'Create Note' while 'Insert Field' is active. [DESKTOP-477341]

    • The Ribbon's single-button command no longer turns into a flyout menu. [DESKTOP-363726]

    • Icons in the ribbon menu display correctly on high-resolution monitors, ensuring better visibility. [DESKTOP-263348]

    • Users can save customized icons directly in Icon Explorer for easy access. [DESKTOP-326185]

    • Users can reset customized commands to default settings easily. [DESKTOP-326186]

    • The 'Open in Browser' button now displays the 'Automation Job Status' tooltip for better clarity. [DESKTOP-454292]

    • The common file dialog in Automation Jobs no longer permits local file selection, preventing job failures. [DESKTOP-454475]

    • Resolved duplicate title bar issue when adjusting display scaling settings. [DESKTOP-455509]

    • Resolved issue where files couldn't be opened from Start Page list view after renaming. [DESKTOP-463108]

    • The Start Page search retains results when toggling between List and Grid views. [DESKTOP-463109]

    • The ribbon combo box menus have been refined to dynamically adjust width based on content size. [DESKTOP-464060]

    • The MAKESHAPE command no longer overwrites existing files when FILEDIA=0 is set. [DESKTOP-464545]

    • The 'Draworder' label in the DRAWORDERBYCOLOR dialog is fully visible. [DESKTOP-465588]

    • The contextual menu in -VIEW command now correctly selects “Bottom” instead of “Back” for orthographic options. [DESKTOP-467282]

    • The 'Restart' option on crash now displays correctly in the mnemonics control. [DESKTOP-467957]

    • The status bar now correctly displays 'Editing Block: XYZ' instead of 'ARES Commander' during block edits. [DESKTOP-468423]

    • The status bar coordinates display correctly when 'Show Icons and Label' is selected. [DESKTOP-470695]

    • Switching through the Start Page with Ctrl+Tab no longer resets drawing layout/order. [DESKTOP-472285]

    • Ribbon tooltips display complete text when 'Show Labels' is active on the Status Bar. [DESKTOP-472929]

    • The visual gap between VS controls and Views control after orbiting in Japanese ROLLVIEW has been resolved, ensuring a seamless interface. [DESKTOP-473242]

    • The ARender window dialog box displays correctly on extended monitors, resolving cropping issues. [DESKTOP-473466]

    • MacOS users will see clear separation between drawing tabs and correct drawing names during ITE. [DESKTOP-474716]

    • The status bar coordinates remain visible even when the command recommender refreshes. [DESKTOP-475432]

    • Resolved UI issue with PRINT dialog when moved to a secondary screen. [DESKTOP-475803]

    • Dialogs in XtraTools maintain proper UI when moved between screens. [DESKTOP-475817]

    • The issue causing a crash when using CTRL+TAB to switch drawing tabs has been resolved, ensuring smooth navigation. [DESKTOP-476797]

    • Inactive sheet tabs no longer stay highlighted after selecting all sheets in 'Move/Copy'. [DESKTOP-477236]

    • The sheet list arrow button remains visible after closing another tab. [DESKTOP-477339]

    • The 'Activate Model Tab' option in the right-click menu for Model/Sheet tabs has been restored, allowing users to easily switch to the model tab. [DESKTOP-477447]

    • The language list in My Setup now displays only the available languages for the OEM version. [DESKTOP-489613]

    • Resolved crash issue when moving the migration/patternhatch dialog box to a secondary screen. [DESKTOP-475805]

    • The Property setting palette Save dialogue now matches Dark mode for a consistent interface. [DESKTOP-469630]

  • BIM Features:

    • Resolved an issue on MacOS where specifying an entity in Edit Block Attribute > FIELD > BIM caused the application to hang. [DESKTOP-463544]

    • IFC Base Quantities now display with correct decimal precision, ensuring accurate data representation in selection events. [DESKTOP-473763]

    • Mnemonics in BIMDIMENSIONSTYLE are accessible again for smoother navigation. [DESKTOP-108058]

    • Corrected flipped dimensions on top and left sides in section box plan views. [DESKTOP-455227]

    • The search field's X button in BIM Styles Manager is now properly centered, enhancing user experience. [DESKTOP-464691]

    • Reverse grid line placements in BIMGRIDLINES using UNDO command. [DESKTOP-325477]

    • DISCARDUPLICATE command in BIM Drawings with material hatch no longer consumes excessive system memory. [DESKTOP-457332]

    • Resolved an issue where BIMAUTODRAWINGS would hang on certain angled building models. [DESKTOP-440191]

    • Auto-zoom fit introduced after inserting imported geometry, enhancing drawing visibility. [DESKTOP-82014]

    • Resolved crash issue when importing main model without linked files in BIM Import. [DESKTOP-465666]

    • Resolved an issue where BIM Labels became oversized when activating VP post-automation. [DESKTOP-439550]

    • Edges between elements with the same material in BIM drawings display as a single surface, enhancing visual clarity. [DESKTOP-470103]

    • Selection flicker in BIM Navigator's entity tree has been resolved for smoother navigation. [DESKTOP-469996]

    • EXPORTDRAWING command in BIM projects no longer generates corrupted DWG files. [DESKTOP-461644]

  • Cloud and Commenting:

    • Users can now upload files to the last used location in Cloud Storage, streamlining workflow. [DESKTOP-354038]

    • Resolved issue where deleting a path in ARES Kudo switched Cloud Storage to Box drive. [DESKTOP-432154]

    • Resolved issue where pressing ESC made the permissions dialog blank during expiration date setup. [DESKTOP-464186]

  • API and Customization:

    • Resolved issue where existing commands were unrecognized when a new LISP command shared the same name. [DESKTOP-147686]

    • LISP command point selection now displays the prompt and object snap node correctly. [DESKTOP-457796]

    • The issue with repeating commands using RETURN or Space Bar after QINPUT has been resolved. [DESKTOP-467101]

    • Resolved LISP incompatibility with vl-list* when a nil entry is at the end of options. [DESKTOP-468439]

    • Fields with LISP variable values retain their data when saved in ARES and reopened in AutoCAD. [DESKTOP-475781]

    • SetCurrentView() method in the Editor object functions correctly. [DESKTOP-473827]

    • Block names in the Smart Select Tool and dialogs are sorted alphabetically for easier navigation. [DESKTOP-449710]

    • Command search in CUI Editor now includes both command entry and its description for more accurate results. [DESKTOP-452553]

    • Users can save UI customization changes even if 'Application.xml' is read-only. [DESKTOP-474419]

    • Decimal values can be entered in the Distance field for Pattern Along Path. [DESKTOP-477358]

    • The 'File extension for automatic save' option is visible in the ARES Commander Options dialog, aligning with the Help Article. [DESKTOP-414584]

    • The issue with default palettes not restoring after profile reset from fullscreen has been resolved. [DESKTOP-464506]

    • The GRIDMAJOR command now correctly prompts for input when values are out of range. [DESKTOP-478297]

  • External References:

    • The 'Reload all' function after using UNDO now correctly displays missing XRef messages in the command line. [DESKTOP-456893]

    • Users can control the XREFOVERRIDE system variable from the Options dialog. [DESKTOP-461917]

  • Drawing Compare:

    • Resolved an issue where comparing drawings over 23 MB caused ARES Commander 2027 to freeze, ensuring differences are displayed correctly. [DESKTOP-466189]

  • Performance:

    • Smoother transitions when switching viewports improve overall performance. [DESKTOP-461205]

    • Selecting a Solid hatch and using Zoom no longer causes ARES to freeze. [DESKTOP-475874]

  • AI Resources:

    • Users can efficiently find commands even when the workspace is inactive. [DESKTOP-360613]

    • Voice recognition in A3 has been corrected. [DESKTOP-418504]


    If you are facing issues that are crashing the application, please use the Crash Report tool to let us know about it. If possible, it's always useful to provide the reproduction steps in the comments section of the Crash Report tool.

ARES Commander 2027 SP1 (27.1.1.1150/27.1.1.2155) - Released 06/07/2026

YOU CAN QUICKLY REVIEW THE TOP UPDATES:

Below you can find the main fixes and new improvements on ARES Commander 2027 SP1:

New features or enhancements:

  • Grid in graphical area allow display in line style [DESKTOP-42920]

  • Rubbersheeting command [DESKTOP-413058]

  • Cloud freehand improvements [DESKTOP-295342]

  • Command Pattern/Array with Associative in Path option [DESKTOP-86958]

  • Option to toggle between icons and text in the status bar [DESKTOP-400422]

  • BIM drawings now support the use of external and internal references [DESKTOP-353338]

  • External dimensions now support curtain walls [DESKTOP-260416]

Print, export and sheets:

  • IMPORTPDF command now accepts negative angles. [DESKTOP-433196]

  • Resolved issue causing drawings with ECW images to freeze at 46% during opening. [DESKTOP-455530]

  • Resolved issue with IMPORTSTEP command failing to import specific STEP files. [DESKTOP-459753]

  • Resolved an issue on MacOS where the application would hang when printing to PNG/JPG for the first time. [DESKTOP-397278]

  • Resolved an issue on MacOS where 'Helvetica Neue' text would break when using Print to PDF and EXPORTPDF. [DESKTOP-441630]

  • Resolved an issue where large images weren't printing with DocuWorks Printer. [DESKTOP-452696]

  • Resolved an issue where drawings with large images couldn't be printed using the built-in PDF printer. [DESKTOP-452894]

  • Print Preview for 3D Solids displays correctly with 'Hidden or Sketchy' visual style. [DESKTOP-455518]

  • UI improvement to allow users can easily access the Model tab even in drawings with numerous Sheets. [DESKTOP-287810]

  • Resolved an issue where overlapping paper space viewports displayed incorrectly with shaded visual styles. [DESKTOP-445974]

  • Entities remain visible and clear during zoom in/out, resolving pixelation issues in specific drawings. [DESKTOP-460733]

Geometry draw or modification:

  • The REVOLVE command window displays 'Entity' instead of 'Object'. [DESKTOP-439576]

  • Resolved error with CLIPBOARDCOPY and COPY commands when using complex Sweep Solids. [DESKTOP-441074]

  • Entities in an Associative Circular Pattern with a Z coordinate no longer shift position when selected. [DESKTOP-88672]

  • The 'Increment' option in the EDITLENGTH command now correctly applies negative angle values to arcs. [DESKTOP-45800]

  • Resolved incorrect behavior with self-intersecting splines in *EXTRIM* command. [DESKTOP-449923]

  • The *EXTRIM* command now correctly trims notes with rotated, vertical, and widened boundaries. [DESKTOP-451214]

  • Trimming a hatch with EXTRIM no longer breaks its associativity. [DESKTOP-456756]

  • Offsetting a polyline with a global width now correctly displays the width in the new entity. [DESKTOP-462977]

  • LineWeight and Transparency in Layer Properties Filter can be set to 'None'. [DESKTOP-456842]

  • The OSNAPZ option (set to 1) now properly supports extension lines, ensuring accurate snapping. [DESKTOP-427366]

  • Dimension values remain consistent when using END in the command line with Esnap disabled, even if annotation scale is applied in the viewport. [DESKTOP-461158]

  • The '-MergeSheets' command no longer prompts 'nil' when choosing to delete unused sheets. [DESKTOP-53840]

  • Shape definition creation in MakeShape is now supported, enhancing design capabilities. [DESKTOP-59791]

  • CURVEDTEXT end grips can now effectively stretch curved text for precise adjustments. [DESKTOP-78598]

  • Entities are highlighted when using GETNESTEDPROPERTIES, enhancing user interaction. [DESKTOP-386375]

Blocks and Data extraction:

  • Resolved an issue where the STRETCH command failed to move custom blocks. [DESKTOP-145119]

  • Blocks in sheets now display correctly in ARES, matching the Block Structure view. [DESKTOP-428672]

  • The [Ctrl] key + double-click shortcut for editing block attributes has been restored. [DESKTOP-464668]

  • Selecting multiple entities, including blocks, now displays properties in the Properties palette for easy modification. [DESKTOP-469782]

  • The MAKEBLOCK command now supports all object selection modes. [DESKTOP-470056]

  • Resolved a crash in the Classic workspace when executing hatch patterns from Tool Palettes. [DESKTOP-453325]

Annotations:

  • Resolved text overlap issue in Note editor when using 'Space before paragraph' with 'Bottom' justify. [DESKTOP-48436]

  • Multiline fields in DIESEL expressions display correctly, enhancing readability. [DESKTOP-443513]

  • Resolved issue where Properties palette appeared empty when selecting both a Block and an AreaNote. [DESKTOP-449107]

  • Resolved issue where default values in DIESEL expressions were incorrectly retained in MAKEBLOCKATTRIBUTE with 'Multi-line' settings. [DESKTOP-450408]

  • Creating AREANOTE in Orthographic views beyond top view is now possible. [DESKTOP-456907]

  • Alignment issues with text containing symbols have been resolved. [DESKTOP-458095]

  • Pressing 'ESC' in FIELD > Formula no longer causes cursor freeze, preventing forced ARES closure. [DESKTOP-458406]

  • AREANOTE command displays units as 'm²' for a more intuitive experience. [DESKTOP-458834]

  • The setting for display notation precision in the FIELD command under Additional Format for area now applies correctly. [DESKTOP-464636]

  • Resolved an issue where using wildcards in the FIND command caused ARES to crash. [DESKTOP-466101]

  • The MLEADER command correctly uses the second point for leader lines and block size. [DESKTOP-449987]

  • The 'Content lock' feature in TABLE command CELLPROPERTYPAINTER no longer gets overridden, ensuring cell protection remains intact. [DESKTOP-451978]

  • The context menu in tables now allows selection of character set language seamlessly. [DESKTOP-455997]

  • Resolved issue where formulas in tables did not evaluate if cell text was formatted. [DESKTOP-456762]

  • The “Save changes” pop-up in EDITTABLE no longer appears twice when closing without saving. [DESKTOP-456836]

  • Resolved a crash when changing cell styles, merging cells, and inserting columns in tables. [DESKTOP-467567]

  • Leader text alignment issue during STRETCH operation has been resolved. [DESKTOP-447243]

  • Resolved issue where changing text style of curved text with [CURVEDTEXT] command resulted in characters displaying as '?'. [DESKTOP-450410]

Graphic System:

  • Edges of polyfacemesh entities are correctly rendered in shaded with edges visual style using the Angle profile graphics system. [DESKTOP-265140]

  • XRay Visual style artifacts during zoom with layered solids have been resolved. [DESKTOP-273349]

  • Custom LineType text now correctly reflects UCS rotation, preventing confusion in output. [DESKTOP-437026]

  • The linestyle preview in RICHLINE no longer displays duplicate shapes when hovering or selecting. [DESKTOP-448755]

  • Correct entity highlights when using COPYNESTED (NCOPY) command for accurate selections. [DESKTOP-348882]

  • Selection tool accurately highlights entities within the pick box. [DESKTOP-362643]

  • Occluded Edges now appear in dynamic previews during drag, drop, copy, or move actions. [DESKTOP-431010]

User interface:

  • Resolved issue with opening files as 'Read-Only' using right-click in the Common File Dialog. [DESKTOP-454976]

  • Asian characters in Layer Translator's transaction log file display correctly. [DESKTOP-451312]

  • User-defined commands have been successfully migrated to the new version. [DESKTOP-53361]

  • Dragging dialogs to an extended display no longer causes them to collapse. [DESKTOP-131142]

  • The 'Color Books' tab in the Line Color Dialog has been localized for all supported languages. [DESKTOP-361494]

  • Switching between documents and the Start Page no longer causes documents to undock. [DESKTOP-371943]

  • Switching between drawings no longer causes a disruptive white screen flash. [DESKTOP-377303]

  • Property Painter Dialog checkboxes have been aligned for a cleaner interface. [DESKTOP-396204]

  • Customization of the Ribbon 'Tabs' section in CUI now saves changes properly. [DESKTOP-436336]

  • The UNION command button is visible again in all workspaces. [DESKTOP-437975]

  • Active drawing tab highlight color is consistent across Light and Dark modes. [DESKTOP-442988]

  • Ribbon comboboxes now utilize full section length for better visibility and ease of use. [DESKTOP-449120]

  • Vertical separators in the Ribbon enhance button alignment for a cleaner interface. [DESKTOP-449122]

  • Resolved issue where executed commands stayed highlighted in the Command Recommender. [DESKTOP-449835]

  • The *Command Recommender* is visible again in FULLSCREEN mode. [DESKTOP-453903]

  • Resolved overlapping of images and text in Online Help for better readability. [DESKTOP-455964]

  • AREANOTE dialog UI displays correctly when moved between monitors with different DPI scaling. [DESKTOP-455969]

  • The Start button in Drawing Compare is disabled until a 'File to compare' is specified, preventing errors. [DESKTOP-456389]

  • Canceling an AREANOTE no longer leaves text in the Description input box. [DESKTOP-456417]

  • Searched strings in Dark style are now clearly readable in OnlineHelp. [DESKTOP-456450]

  • Pressing 'Esc' key successfully closes the Text Font drop-down list. [DESKTOP-456761]

  • The dialog box for Automation Jobs displays correctly at all scaling settings. [DESKTOP-458435]

  • The View Styles options text in the Korean version has been corrected to prevent overlapping, ensuring a clearer and more readable interface. [DESKTOP-461635]

BIM Features:

  • MacOS users will no longer see error when selecting BIM entities in FIELD command. [DESKTOP-108459]

  • Level lines and symbols in BIM remain consistent after grip editing and annotative scale changes. [DESKTOP-335172]

  • BIMAUTOLABELTYPE setting introduced in Options dialog, refining BIM label handling. [DESKTOP-360184]

  • The issue where sheet set files failed to load from cloud storage with BIM drawings has been resolved. [DESKTOP-440707]

  • Opening a BIM drawing from cloud storage now loads the BIM Project in the BIM Navigator. [DESKTOP-441434]

  • Conceptual Visual Style issue resolved, ensuring all walls in imported BIM models display correctly as shaded. [DESKTOP-447218]

  • Roof dimensions can now be included in BIM templates. [DESKTOP-437739]

  • Audit errors in BIM Drawing have been resolved. [DESKTOP-441400]

  • The problem with elevation drawings breaking after a refresh when building positions were altered has been resolved. [DESKTOP-449989]

  • BIMRELOADFROM command now supports using just the file name, simplifying file management. [DESKTOP-468719]

  • Resolved issue where RFA file imports in BIM Import would stall at 50% completion. [DESKTOP-396890]

  • Proxy entities no longer remain after copying and re-importing BIM files. [DESKTOP-447189]

  • Prioritize labeling small rooms first with BIMADJUSTLABEL for better organization. [DESKTOP-340411]

  • Label placement in BIM Automation plans has been corrected for accurate positioning. [DESKTOP-419488]

Cloud and Commenting:

  • Resolved an issue causing crash when opening cloud drawings with unreferenced DGN references. [DESKTOP-456789]

  • Resolved login issue with ARES Commander when connecting to cloud storage (Kudo Drive or Google Drive). [DESKTOP-456823]

  • Users can select input files from the cloud when creating new jobs in ARES Commander. [DESKTOP-464061]

  • The Comments palette now correctly appears when using PLACEPICTURERECORDING, PLACEVOICERECORDING, and PLACESTAMP commands. [DESKTOP-91970]

API and Customization:

  • Resolved graphical issues and crashes when opening drawings with the MainForm window in .NET CORE API ActiveX. [DESKTOP-456807]

  • The 'getkword' function in Lisp/DCL no longer returns an extra character when using 'initget'. [DESKTOP-433758]

  • The ENTMAKE Lisp-function reliably returns the entity list when opening a BLOCK entity. [DESKTOP-446557]

  • Resolved crash issue when using the ENTMAKE function. [DESKTOP-457240]

  • The 'getkword' command displayed a duplicate initget option in preselection. [DESKTOP-457749]

  • .Net Managed dll in ARES 2027 can be executed from any folder. [DESKTOP-469115]

  • The system variable MODEMACRO has been corrected to function as expected. [DESKTOP-446562]

License:

  • The Statistics Exports feature in Flex Licensing has been corrected to accurately display the number of available ARES client licenses. [DESKTOP-437669]

  • Asian characters in NLM Log files display correctly. [DESKTOP-439033]

Performance:

  • Preview generation for specific text during COPY/MOVE is now faster. [DESKTOP-461450]

  • 3D STEP files display correctly in ARES Commander, resolving previous visibility issues. [DESKTOP-429194]

  • Opening some specific DXF files with wrong data no longer causes ARES to hang. [DESKTOP-443992]

  • Resolved issue where ARES would freeze during zoom-out on drawings with external references. [DESKTOP-446673]

AI Resources:

  • AI consent prompt no longer appears again when using a second machine with the same account. [DESKTOP-454891]

  • Switching user accounts now correctly prompts for AI consent, ensuring privacy compliance. [DESKTOP-454892]

  • Consent message now appears when AI Translator is activated through the floating icon. [DESKTOP-454869]

If you are facing issues that are crashing the application, please use the Crash Report tool to let us know about it. If possible, it's always useful to provide the reproduction steps in the comments section of the Crash Report tool.

ARES Commander 2027 SP0 (27.0.1.1128) - Released 20/03/2026

YOU CAN QUICKLY REVIEW THE TOP UPDATES:

QUALITY AND PERFORMANCE IMPROVEMENTS

  • SPEED GAINS IN ARES COMMANDER

    • Testing with 65 reference drawings and 5 different hardware configurations has confirmed that ARES Commander 2027 is the fastest version ever. In comparison to version 2026 SP0, which was released in 2025, ARES Commander version 2027 SP0 opens drawings up to 20% faster. In addition, COPY operations are up to 50% faster, navigation is 9–25% faster, and SAVE and autosave run without blocking the interface.

  • 2D & 3D CAD IN DWG FOR WINDOWS, MAC & LINUX

    • COPY PROPERTIES BETWEEN DRAWINGS

      • The updated PROPERTYPAINTER command streamlines workflows, especially when working on projects split across multiple files that require consistent styling and standards. Simply copy properties from an entity in one drawing, then apply them to entities in another open drawing!
        And in addition to standard properties, users can also match special properties similar to those supported in AutoCAD.

  • XREF: MANAGE LINKS AND REPAIR PATHS EASILY

    • Resolve broken references quickly — or better yet, prevent them in the first place. When saving a drawing with relative path Xrefs to a new location, ARES Commander displays a warning if those references may not load — helping prevent broken links. And with a new batch workflow, users can correct all missing reference paths in a single step, avoiding manual updates.

  • CONVERT DWG TO STEP (STEP IMPORT/EXPORT)

    • Do you need to share 3D models with SOLIDWORKS®, Inventor®, PTC Onshape®, other CAD, CAM, or CAE applications? Simplify collaboration with clients and partners by using STEP (.stp/.step), one of the most widely used exchange formats for 3D CAD and PLM software. STEP Import was introduced in a previous version of ARES Commander, and now you can convert your DWG drawings to STEP as well.

  • QUICK AREA CALCULATION AND LABELING

    • Available online in ARES Kudo, on the desktop in ARES Commander, and in mobile devices on ARES Touch, AREANOTE calculates areas quickly and represents them visually within drawings. After selecting a region — either by clicking inside it or by defining its boundary — the command automatically:
      ● Calculates the area (in drawing units)
      ● Creates a colored fill for easy visual identification (with optional transparency)
      ● Adds a label showing the measured area and/or a custom description

AI AND AUTOMATION FOR DWG

  • CREATE AND MODIFY DWG ENTITIES WITH A3

    • The latest enhancements to ARES AI Assist (A3) in ARES Commander and ARES Kudo extend the power of this CAD-savvy artificial intelligence, which is specially trained to help ARES users. The improvements include the ability to select and modify entities with the same prompt. In addition, A3 can now create simple entities (such as lines, polylines, rectangles, and circles) according to user specifications.

  • REAL-TIME COMMAND RECOMMENDATIONS

    • Spend less time searching for tools with the new command recommendation system in ARES Commander 2027. This AI-powered widget uses intelligent algorithms to analyze your interactions with the software in real time, then provides a list of 6 commands that are most likely to be used next. By tracking command sequences and usage patterns, the system builds adaptive user profiles, enabling personalized recommendations.

  • GENERATE BLOCKS IN TRINITY BLOCK LIBRARY WITH AI

    • Creating CAD blocks in ARES Commander and ARES Kudo just got a lot easier, thanks to a new tool that can generate precise CAD components directly from simple text descriptions. With the new AI-Assisted Block Generation tool, you can simply describe what you need — such as a door swing, a power outlet, or a table — and the system will generate an accurate, standards-aligned symbol for you.

  • AUTOMATION FROM THE CLOUD STORAGE PALETTE

    • The Cloud Storage palette enables you to connect ARES Commander with your cloud storage accounts, so you can open and edit the files stored there as if they were saved on your hard drive. Now, you can also right-click on the files to launch an automation. For example, simply right-click on a PDF file and select Convert to DWG, and the Online Automation job will perform the conversion.

BIM-TO-DWG DRAWINGS AUTOMATION

  • REVIT 2026 FILE FORMAT SUPPORT

    • BIM drawings are DWG drawings generated from Revit or IFC BIM projects uploaded into ARES Commander. This generation can be completed automatically, thanks to Graebert’s BIM-to-DWG drawings automation technology. Now that ARES Commander 2027 has added support for the Revit 2026 file format, users can generate BIM drawings from RVT files created in Revit versions 2011 through 2026.

  • BIM DRAWINGS AUTOMATION CONNECTED WITH AUTODESK FORMA DATA MANAGEMENT

    • ARES Commander and ARES Kudo can automate the creation of DWG files from Revit or IFC files. These files can be stored locally on your computer or in a connected Cloud storage account, such as Google Drive, Dropbox, Box, OneDrive, or Microsoft SharePoint. Now you can also connect to Autodesk Forma Data Management (previously known as Autodesk Construction Cloud, or ACC), and therefore use Revit files that are stored there.

  • ONLINE BIM DRAWINGS AUTOMATION FROM ARES COMMANDER

    • The BIMAUTOALL, BIMRELOAD, and BIMDATAEXTRACTION commands can now be used from our online service, yet accessed directly from ARES Commander. Based on the ARES Online Drawings Automation features previously released in ARES Kudo, this feature offloads tasks to an online server, so you can keep working on other activities without interruption. You also have the ability to schedule automation tasks for a future time, and to set up recurring jobs.

CLOUD-BASED COLLABORATION FOR CAD IN DWG

  • CREATE AND MODIFY DWG FILES IN AUTODESK FORMA DATA MANAGEMENT

    • The new integration with Autodesk Forma Data Management enables ARES Commander, ARES Kudo, and ARES Touch users to browse, create, and edit DWG drawings in synchronization with this cloud storage. It also unlocks the option to use the Trinity Collaboration features — such as version control, secure sharing, and markup & commenting tools — even though the files are staying in Autodesk Forma.

  • FREE VERSION OF ARES KUDO CUTS COSTS WHILE EXPANDING COLLABORATION ACROSS YOUR COMPANY

    • ARES Kudo is more than just a powerful online CAD application that lets you create, edit, and collaborate on DWG drawings directly in a browser. It also streamlines design workflows and boosts productivity with cloud collaboration, AI assistance, and drawings automation. And with the free version of ARES Kudo, you can have a mix of free and paid users within the same company, improving collaboration while limiting costs.

You can check the full detail enhancement list for ARES 2027 products accessing http://www.graebert.com/whatsnew

Related Articles
Did this answer your question?