Follow these steps to measure a radiator using point-to-point (P2P) measurement.
Step 1: Select Radiator
Select the Radiator option in the software.
Step 2: Measure the Points
Measure all the points one after the other as shown in yellow on the diagram. As soon as a yellow point has been successfully measured, it will turn green.
1. Outer left edge: Measure any point along the far-left edge of the radiator.
2. Outer right edge: Measure any point along the far-right edge of the radiator.
3. Top edge: Measure any point along the top surface of the radiator.
4. Bottom edge: Measure any point along the bottom surface of the radiator.
5. Front surface: Measure a point directly on the front face of the radiator to capture its depth.
6. Outer edge of the valve: Measure the outermost point of the radiator valve.
Step 3: Complete the Measurement
Once all points have turned green, click OK ✅.
