Step 1: Choose Window.
Step 2: In the floor plan, select the corner of the wall from which you are measuring the window.
Step 3: Measure the distance d1 (the distance from the outer edge of the window opening to the corner of the wall).
Step 4: Click on Continue.
Step 5: Measure the width, height and sill height of the opening. Enter an opening direction.
Optionally, you can now measure further details in the tabs shape, details, sash, window sill.
Step 6: Click the Details tab.
Step 7: Enable Measure details.
Step 8: Measure the
Window bottom edge,
Frame - Bottom edge,
Window aperture depth and the
Clear inner width.
Step 9: Click OK and the window will be added to the floor plan.
Note: The profile widening is calculated automatically using the MINUS parapet height of the window sash lower edge.