< previous page next page >

Step 1: Choose Window.

Step 2: In the floor plan, select the corner of the wall from which you are measuring the window.

Step 3: Measure the distance d1 (the distance from the outer edge of the window opening to the corner of the wall).

Step 4: Click Next.

Step 5: Measure the width, height and sill height of the opening. Enter an opening direction.

Optionally, you can now measure further details in the tabs shape, details, sash, window sill.


Step 6: Click the Details tab.

Step 7: Enable Measure details.

Step 8: Measure the

Window bottom edge,

Profile extension,

Frame - Bottom edge,

Window aperture depth and the

Clear inner width.

Step 9: Click OK and the window will be added to the floor plan.

Note: The profile widening is calculated automatically using the MINUS parapet height of the window sash lower edge.

< previous page next page >

Did this answer your question?