Skip to main content
Step 12: Insert Obstacle

SiteMaster Kitchen v6, Insert Obstacle

Sabine Becker avatar
Written by Sabine Becker
Updated over 3 years ago

How to insert an obstacle (e.g. a boiler).

Step 1: Choose Insert Obstacle.

Step 2: In the floor plan, select the wall ceiling from which you are measuring the obstacle.

Step 3: Measure the distance d1,

Width,

Depth,

Top height (upper edge of the obstacle to the ground),

Bottom height (lower edge of the obstacle to the floor)

and the distance to the wall.

Step 4: End the command with OK. 

Did this answer your question?