Skip to main content
Step 10: Insert an Obstacle

SiteMaster Kitchen v6, Insert an Obstacle

Sabine Becker avatar
Written by Sabine Becker
Updated over 3 years ago

How to insert an obstacle (e.g. a boiler).

Step 1: Chose Insert obstacle.

Step 2: In the floor plan, select the corner of the wall from which you are measuring the obstacle.

Step 3: Measure the distance d1,

Width,

Depth,

Top height (Upper edge of the obstacle to the ground),

Bottom height (Lower edge of the obstacle to the ground)

and the Distance to wall.

Step 4: End the command with OK.

Did this answer your question?