< previous page next page >

This is how you add a roof pitch.

Step 1: Choose Roof pitch.

Step 2: In the floor plan, select the wall corner from which you measure the roof pitch.

Step 3: Measure the values in order with the laser and transfer the respective measured value after each measurement with the Bluetooth button from the laser to the corresponding input field. After each transfer, the next field is active.

  1. Measure the distance d1 from the roof pitch to the wall corner ( usually 0, if the roof pitch starts in the wall corner).

  2. Measure the width.

  3. Measure the knee wall.

  4. Measure the measuring distance.

  5. Measure the measurement height.

Step 4: Add the measured roof pitch to your floor plan using the blue check mark in the upper right corner.

Step 5: Exit the Measure Roof Pitch command with the white cross in the upper right corner.

< previous page next page >

Did this answer your question?