How to add a tile backsplash to wall elevations.
Step 1: Select a wall view via sheets, e.g. 1.
Step 2: Click Tiles in the Symbols menu.
Step 3: Click on the wall side from which you measure the tile level.
Step 4: Measure the values with the laser in order and transfer the respective measured value from the laser to the corresponding input field with the Bluetooth key after each measurement. After each transfer, the next field is active.
Bottom d1, distance from the wall corner to the beginning of the 1st tile and transfer the measured value to the field using the Bluetooth key on the laser. After the transfer, the Distance d2 field is automatically activated.
Bottom d2, distance bottom edge tile level to floor.
Width, width of the tile mirror.
Height, height of the tile level
Depth, front edge tile to wall - Importend: shout be minimum 1 mm depth.
Step 5: Add the measured tile panel to your wall view with the Blue Hook in the upper right corner.
If necessary, measure another tiled area on the selected wall view, e.g. a splash guard tiled area above the stove.
Step 6: Finish the Insert Tile command for this wall view with the White Cross in the upper right corner.
If you want to continue measuring tiles on another wall view, you must change the wall view first.