⚠️ NOTE: All installations and fittings must always be measured from their centre point.
Step 1: Select Symbols
Select the Symbols option in the software.
Step 2: Choose a symbol
Select the required symbol from the menu.
Step 3: Measure the centre point
Measure the exact centre point of the fitting (e.g. double socket, light switch, etc.).
Step 4: Confirm and insert
To insert the selected symbol at the measured point, click OK ✅.
To exit the command, click the X in either the top-right or bottom-right corner.
💡 Tip: Additional symbols can be found in the drop-down sections below your Favourites.
Learn how to add your favourite symbols here: