Follow these steps to measure a niche using point-to-point (P2P) measurement.
Step 1: Select Wall Niche
Select the Wall Niche option in the software.
Step 2: Measure the Points
Measure all the points one after the other as shown in yellow on the diagram.
As soon as a yellow point has been successfully measured, it will turn green.
Step 3: Complete the Measurement
Once all points have turned green, click OK ✅.
Step-by-Step Points Guide:
Left edge- measure any point along the left edge of the niche.
Right edge- measure any point along the right edge of the niche.
Top edge- measure any point along the top edge of the niche.
Bottom edge- measure any point along the bottom edge (base) of the niche.
Depth- Measure any point on the back wall to capture the depth of the niche.
